Skip to content

80μm Matt silver inkjet matt silver PET/water glue/80g white glassine

Article Name80μm Matt silver inkjet matt silver PET/water glue/80g white glassineCodeWB8075
Face StockLiner
Article NameInkjet silver petArticle NameWhite Glassine
(μ)
Thickness
80±3(μ)
Thickness
70±3
(g/m)

Basic Weight

103±3(g/m)

Basic Weight

78±3
ColorSilverColorWhite
Surface tension~~(g/in)

Release Force

10-15g
Adhesive
Water-based adhesive
PropertiesValueUnitTest Method
Glue

Thickness

16±3μISO534
Dry Coating Weight18±3g/m2FTM12,SS
180° Peel Force≥6N/25mmFTM1, SS
Annular initial tack≥8N/25mmFTM9,SS
Sustained tack≥24H/25mmFTM8,SS
Service Temperature-20-70~~
Min-Labeling Temperature5~~
Storage conditionsStorage conditions are normal temperature, a cool, ventilated and dry place (0~28℃, below 70%RH), avoid high temperature and humidity, and do not expose to the sun or rain. The best storage conditions are 23±5℃, 65±5%RH, shelf life is 12 months. Note: If the product is placed under conditions where the temperature and humidity are too high or too low for a long time, the shelf life will be significantly shortened.
StatementThe above technical data are average data obtained through multiple inspections using recognized and reliable inspection methods, but do not constitute a guarantee. In order to ensure the correct use of our products, please be sure to test them on the corresponding substrate and use environment to verify the use effect before using our products. To confirm whether it meets the requirements of the base material and usage environment, determine which material to purchase. At the same time, our company reserves the right to improve technical specifications without prior notice. Since the usage is beyond our control, our company is not responsible for any losses caused by use.

·Our company is responsible for retaining the right of final interpretation.

Reviews

There are no reviews yet.

Be the first to review “80μm Matt silver inkjet matt silver PET/water glue/80g white glassine”

Your email address will not be published. Required fields are marked *

leave a message