Skip to content

50μm brushed silver/Solvent base/80g mesh glassine

Article NameCoated 50# brushed silver

Oil glue

80g mesh glassine

CodeOPT4506
Face StockLiner
Article NameBrushed silver PETArticle NameNetted Glassine
(μ)
Thickness
45±3(μ)
Thickness
90±3
Basic weight (g/m)63±3Basic weight (g/m)100±3
ColorSilverColorWhite
Surface tension~~Release force (g/in)8-10g
Adhesive
Oil based adhesive
Test project

Properties

ValueUnitTest Method
Glue

Thickness

20±3μISO534
Glue amount

Dry Coating Weight

22±3g/m2FTM12,SS
180° Peel Force≥10N/25mmFTM1, SS
Annular initial tack≥12N/25mmFTM9,SS
Sustained tack≥24H/25mmFTM8,SS
Service Temperature-20-80~~
Min-Labeling Temperature0~~
Storage ConditionStorage conditions are normal temperature, a cool, ventilated and dry place (0~28℃, below 70%RH), avoid high temperature and humidity, and do not expose to the sun or rain. The best storage conditions are 23±5℃, 65±5%RH, shelf life is 12 months. Note: If the product is placed under conditions where the temperature and humidity are too high or too low for a long time, the shelf life will be significantly shortened.
StatementThe above technical data are average data obtained through multiple inspections using recognized and reliable inspection methods, but do not constitute a guarantee. In order to ensure the correct use of our products, please be sure to test them on the corresponding substrate and use environment to verify the use effect before using our products. To confirm whether it meets the requirements of the base material and usage environment, determine which material to purchase. At the same time, our company reserves the right to improve technical specifications without prior notice. Since the usage is beyond our control, our company is not responsible for any losses caused by use.

·Our company is responsible for retaining the right of final interpretation.

Reviews

There are no reviews yet.

Be the first to review “50μm brushed silver/Solvent base/80g mesh glassine”

Your email address will not be published. Required fields are marked *

leave a message