Skip to content

25μm Transparent PET/Solvent adhesive/140gsm Yellow siliconized paper

Article Name25μm Transparent PET/Solvent adhesive/140gsm Yellow siliconized paperCodeOH1601
Face Stock  Liner
Article NameTransparent PETArticle NameYellow siliconized paper
(μ)
Thickness
19±3(μ)
Thickness
140±3
(g/m)

Basic Weight

27±3(g/m)

Basic Weight

135±3
ColorTransparentColoryellow
Surface tension~~(g/in)

Release Force

15-20g
Adhesive
Hot melt adhesive
PropertiesValueUnitTest Method
Thickness18±3μISO534
Dry Coating Weight20±3g/m2FTM12,SS
180° Peel Force≥14N/25mmFTM1 , SS
Annular initial tack≥15N/25mmFTM9,SS
Sustained tack≥6H/25mmFTM8,SS
Service Temperature-40-65~~
Min-Labeling Temperature0~~
Storage ConditionStorage conditions are normal temperature, a cool, ventilated and dry place (0~28℃, below 70%RH), avoid high temperature and humidity, and do not expose to the sun or rain. The best storage conditions are 23±5℃, 65±5%RH, and the shelf life is
for 12 months.
Note: If the product is placed under conditions where the temperature and humidity are too high or too low for a long time, the shelf life will be significantly shortened.
StatementThe above technical data are average data obtained through multiple inspections using recognized and reliable inspection methods, but do not constitute a guarantee.
In order to ensure the correct use of our products, please be sure to test them on the corresponding substrate and use environment to verify the use effect before using our products.
To confirm whether it meets the requirements of the base material and usage environment, determine which material to purchase.
At the same time, our company reserves the right to improve technical specifications without prior notice.
Since the usage is beyond our control, our company is not responsible for any losses caused by use.·Our company is responsible for retaining the right of final interpretation.

Reviews

There are no reviews yet.

Be the first to review “25μm Transparent PET/Solvent adhesive/140gsm Yellow siliconized paper”

Your email address will not be published. Required fields are marked *

leave a message