Skip to content

25μm Aluminized gloss white PET/Tyre glue/80gsm White glasssine

Article Name25#aluminized white pet

Tire rubber

80g white glassine

CodeGBT2561
Face StockLiner
Article NameAluminized white petArticle NameWhite Glassine
(μ)
Thickness
25±3(μ)
Thickness
72±3
(g/m)

Basic Weight

35±3(g/m)

Basic Weight

78±3
ColorWhiteColorWhite
Surface tension~~(g/in)

Release Force

8-10g
Adhesive
Tire rubber adhesive
PropertiesValueUnitTest Method
Thickness33±3μISO534
Dry Coating Weight35±5g/m2FTM12,SS
180° Peel Force≥25N/25mmFTM1, SS
Annular initial tack≥25N/25mmFTM9,SS
Sustained tack≥3H/25mmFTM8,SS
Service Temperature-40-60~~
Min-Labeling Temperature0~~
Storage ConditionStorage conditions are normal temperature, a cool, ventilated and dry place (0~28℃, below 70%RH), avoid high temperature and humidity, and do not expose to the sun or rain. The best storage conditions are 23±5℃, 65±5%RH, shelf life is 12 months. Note: If the product is placed under conditions where the temperature and humidity are too high or too low for a long time, the shelf life will be significantly shortened.
StatementThe above technical data are average data obtained through multiple inspections using recognized and reliable inspection methods, but do not constitute a guarantee. In order to ensure the correct use of our products, please be sure to test them on the corresponding substrate and use environment to verify the use effect before using our products. To confirm whether it meets the requirements of the base material and usage environment, determine which material to purchase. At the same time, our company reserves the right to improve technical specifications without prior notice. Since the usage is beyond our control, our company is not responsible for any losses caused by use.

·Our company is responsible for retaining the right of final interpretation.

Reviews

There are no reviews yet.

Be the first to review “25μm Aluminized gloss white PET/Tyre glue/80gsm White glasssine”

Your email address will not be published. Required fields are marked *

leave a message