Skip to content

125μm gloss white PET/water base/80gsm White glassine

Category:
Article Name Coating 125# gloss white PET

15g water glue

80g glassine

Code WBT12507B-15
Face Stock Liner
Article Name gloss white PET Article Name White Glassine
(μ)
Thickness
125±3 (μ)
Thickness
70±3
(g/m)

Basic Weight

175±3 (g/m)

Basic Weight

78±3
Color White Color White
Surface tension ~~ (g/in)

Release Force

10-15g
Adhesive
Water-based adhesive
Properties Value Unit Test Method
Thickness 13±3 μ ISO534
Dry Coating Weight 15±3 g/m2 FTM12,SS
180° Peel Force ≥4 N/25mm FTM1, SS
Annular initial tack ≥5 N/25mm FTM9,SS
Sustained tack ≥24 H/25mm FTM8,SS
Service Temperature -20-70 ~~
Min-Labeling Temperature 5 ~~
Storage Condition Storage conditions are normal temperature, a cool, ventilated and dry place (0~28℃, below 70%RH), avoid high temperature and humidity, and do not expose to the sun or rain. The best storage conditions are 23±5℃, 65±5%RH, shelf life is 12 months. Note: If the product is placed under conditions where the temperature and humidity are too high or too low for a long time, the shelf life will be significantly shortened.
Statement The above technical data are average data obtained through multiple inspections using recognized and reliable inspection methods, but do not constitute a guarantee. In order to ensure the correct use of our products, please be sure to test them on the corresponding substrate and use environment to verify the use effect before using our products. To confirm whether it meets the requirements of the base material and usage environment, determine which material to purchase. At the same time, our company reserves the right to improve technical specifications without prior notice. Since the usage is beyond our control, our company is not responsible for any losses caused by use.

·Our company is responsible for retaining the right of final interpretation.

Reviews

There are no reviews yet.

Be the first to review “125μm gloss white PET/water base/80gsm White glassine”

Your email address will not be published. Required fields are marked *

leave a message