Skip to content

100μm brushed silver/3μm water glue/140g single copper base

Article NameCoating 100# Brushed Silver 3#

water glue

140g single copper bottom

CodeWLT10006
Face StockLiner
Article NameBrushed silver PETArticle NameSingle copper base
(μ)
Thickness
100±3(μ)
Thickness
135±3
Basic weight (g/m)140±3Basic weight (g/m)135±3
ColorSilverColorWhite
Surface tension~~Release force (g/in)20-25g
Adhesive
Water-based adhesive
Test project

Properties

ValueUnitTest Method
Glue

Thickness

20±3μISO534
Glue amount

Dry Coating Weight

22±3g/m2FTM12,SS
180° Peel Force≥10N/25mmFTM1, SS
Annular initial tack≥10N/25mmFTM9,SS
Sustained tack≥24H/25mmFTM8,SS
Service Temperature-20-70~~
Min-Labeling Temperature5~~
Storage ConditionStorage conditions are normal temperature, a cool, ventilated and dry place (0~28℃, below 70%RH), avoid high temperature and humidity, and do not expose to the sun or rain. The best storage conditions are 23±5℃, 65±5%RH, shelf life is 12 months. Note: If the product is placed under conditions where the temperature and humidity are too high or too low for a long time, the shelf life will be significantly shortened.
StatementThe above technical data are average data obtained through multiple inspections using recognized and reliable inspection methods, but do not constitute a guarantee. In order to ensure the correct use of our products, please be sure to test them on the corresponding substrate and use environment to verify the use effect before using our products. To confirm whether it meets the requirements of the base material and usage environment, determine which material to purchase. At the same time, our company reserves the right to improve technical specifications without prior notice. Since the usage is beyond our control, our company is not responsible for any losses caused by use.

·Our company is responsible for retaining the right of final interpretation.

Reviews

There are no reviews yet.

Be the first to review “100μm brushed silver/3μm water glue/140g single copper base”

Your email address will not be published. Required fields are marked *

leave a message